Custom Hydraulic Press Manufacturer for 2,000+ Ton Systems
When a manufacturing process demands forces that exceed what standard hydraulic press designs can reliably deliver, the answer is not a larger catalog model. It is a press engineered around the process. French Oil has been custom-building hydraulic press systems for demanding industrial applications since 1900. At capacities above 2,000 tons, that engineering depth is not simply a differentiator. It is a requirement.
Every over-2,000-ton hydraulic press French Oil delivers begins with an engineering conversation, not a product sheet. Tonnage is a starting point. The variables that actually determine press performance and long-term production fit, frame construction, daylight, platen dimensions, pressure distribution, heating method, control architecture, automation integration, and service access. These all require direct evaluation against your specific process requirements.
French Oil is an ISO 9001-certified hydraulic press manufacturer headquartered in Piqua, Ohio. Our presses operate in more than 80 countries across aerospace and defense, fuel cell manufacturing, composite molding, rubber processing, large-part lamination, and specialty industrial applications. At this tonnage range, we function as an engineering partner, not a vendor. That distinction matters across a capital planning cycle that typically runs 18 to 36 months from initial evaluation to installation.
What Defines a High-Tonnage Hydraulic Press System
Buyers evaluating equipment at this scale are managing more than capacity. They are managing technical risk, production continuity, facility constraints, tooling integration, safety requirements, and long-term serviceability. A press specification that addresses tonnage alone is an incomplete specification.
French Oil's engineering team works with manufacturers to evaluate each of the following variables before a configuration is proposed:
- Press capacity and force distribution across the pressing surface
- Daylight and stroke requirements for part geometry and tooling access
- Bed and platen dimensions sized to the part and mold
- Frame rigidity and deflection control under full load
- Hydraulic system design for cycle rate, pressure control, and efficiency
- Heating or cooling method: steam, electric, thermal oil, or water
- Control system architecture: recipe storage, process monitoring, traceability, and repeatability
- Automation integration: shuttle systems, loading and unloading, light curtain guarding
- Construction type: sideplate or column, C-frame or H-frame, up-acting or down-acting
- Maintenance access, component life, and installation requirements
Early engineering discussion, before the RFQ is written, is where specification risk is most effectively reduced. French Oil supports manufacturers through that pre-specification phase as part of how we work.
Press Spotlight: The French ULTRIX 2,000 Ton Hydraulic Press
The French ULTRIX hydraulic press represents the upper range of our precision press engineering. Designed for applications where part dimensional consistency directly affects quality and scrap rate, the ULTRIX delivers measurably low deflection across the full pressing surface. Combined load variation and machining error is approximately one-third the value found in standard precision presses, a difference that compounds across production volume in reduced scrap, less post-processing, and lower lifecycle cost.
- At 2,000 tons over a 50" x 50" pressing surface, the ULTRIX maintains +/- .001" variation in deflection and machining error under full load.
- Construction is built around French Oil's rugged patented taper key sideplate press design, combined with dependable and efficient hydraulic systems.
PRODUCT DESIGN BY TYPE
DESIGN BY TONNAGE
Product Literature Downloads
Example Press Designs at This Capacity
The following configurations represent a portion of French Oil's delivered over-2,000-ton press installations. Every press is custom-engineered. These specifications are illustrative of the range of problems we solve, not the limits of what is possible
2,000 Ton Ultrix Hydraulic Press
Construction: Slab side, sideplate
Molding process: Compression
Capacity: 2,000 Ton
Pressing surface size: 53 x 53 inches
Number of openings: 2
Open daylight: 15 inches each
Industry: Fuel cell
2,200 Ton Hydraulic Press
Construction: Slab side, sideplate
Molding process: Compression
Capacity: 2,200 Ton
Pressing surface size: 64 x 64 inches
Number of openings: 1
Open daylight: 48 inches each
Platen heating: Steam heated platens
Controls: Allen Bradley Micrologix with touchscreen interface
Service and Support Over the Life of the Press
A French Oil hydraulic press is not a one-time transaction. We maintain OEM parts availability and provide rebuild, repair, and retrofit services for every press we have manufactured, including machines installed decades ago. For a capital investment at this scale, that continuity matters. If you are evaluating a rebuild or retrofit of an existing large-tonnage press, our engineering team can assess the current machine and provide a clear recommendation on what will deliver the best performance and cost outcome for your operation.
Our field service and support team is based in Piqua, Ohio and supports customers across the United States and internationally. The same institutional knowledge that designs the press supports it afterward.
Discuss your over-2,000-ton press requirements with our engineering team.
High-tonnage press projects benefit from early engineering review. French Oil supports preliminary planning conversations around tonnage, daylight, heating, controls, and installation requirements, before the specification is finalized. Contact us at 1-937-773-3420 or request a quote to begin the engineering conversation.
FAQ
Service & Support
Hydraulic Press Support Since 1900 | OEM Parts, Repairs, Rebuilds, Retrofits, and Field Service
Request a Quote
Tailored Solutions for Your Manufacturing Needs: Achieve Optimal Process Results with Our Customized Equipment and Specialized Solutions.