Skip to content

Est. 1900 | 126 Years & Counting | Call Us Today: 1-937-773-3420

500-575 Ton Hydraulic Presses

A 500 ton hydraulic press is the workhorse class for large composite molding, high-volume rubber molding and heavy lamination work. French designs and builds custom presses in the 500 to 575 ton range in Piqua, Ohio, with sideplate or column construction, up-acting or down-acting configurations, and heated platen and vacuum chamber options engineered to the part. Every press in this range is sized from your part drawing rather than sold from a catalog, and quoted with the platen size, daylight and controls your process requires.

What molders run at 500 Tons

Tonnage is a calculation, not a guess: projected part area multiplied by the material’s required molding pressure. The 500 to 575 ton class is where that calculation lands for some of the largest parts molded on a single press:

Parts / Components Application
Structural composite panels and componentsAerospace and defense programs, where platen deflection, not clamp force, is usually the spec that decides part thickness tolerance
Multi-cavity production rubber moldingSized on total projected cavity area plus flash land, so the full layout stays closed at compound pressure instead of splitting across smaller presses
Friction materialsHigh-density preforms cure under sustained tonnage and platen heat for the full cycle
Large-format laminationPressure uniformity across the entire platen face governs bond quality

If your area and pressure numbers put you near the edge of this range, our engineers will tell you honestly whether a 400-475 ton press or a 600-975 ton press fits your part better.

500 Ton Press Features

Our 500 ton hydraulic press designs (up to 575 ton) can include:

Feature What it does for you
Top-mounted reservoir and hydraulic power unitReduces floor space requirements
Up-acting or down-acting configurationsMatches press action to your tooling, part handling and shop layout
Sideplate or column constructionFrame style selected for your part size, access and deflection requirements
Electrically heated multi-zone platens, with steam and hot-oil optionsUniform platen temperature across the full part for consistent cure and bond quality
In-chamber vacuum molding configurationVoid-free parts where entrapped air would scrap them
Platen size, daylight and stroke engineered to the partThe frame class fits your drawing instead of forcing the part to fit a catalog machine
Allen-Bradley PLC-based controlRepeatable cycles and quick changeover between parts

500-575 Ton Specifications

Specifications Range
Clamp Force500-575 Ton
Platen sizesQuoted at application
Daylight / strokeQuoted at application
Maximum platen deflection0.001 inch per linear foot at rated tonnage
Platen heatingElectric multi-zone standard; steam and hot-oil available
VacuumIn-Chamber vacuum molding configuration available
ControlsAllen-Bradley PLC-based controls; HMI and data acquisition quoted to application
WarrantyThree-year limited, three times the industry standard

Frequently Asked Questions

500 Ton Class Presses Built by French

500 Ton Hydraulic Press - Compression Press

500 Ton Compression Press

Construction: Sideplate
Molding process: Compression
Capacity: 500 Ton
Pressing surface size: 140 x 72 inches
Number of openings: 1
Open daylight: 90 inches
Controls: Allen Bradley Micrologix PLC with touchscreen interface

500 Ton Hydraulic Press

500 Ton Hydraulic Press

Construction: Four post
Molding process: Compression
Capacity: 500 Ton
Pressing surface size: 60 x 144 inches
Number of openings: 1
Open daylight: 36 inches
Controls: Allen Bradley

550 Ton C Frame Hydraulic Press

550 Ton C-Frame Hydraulic Press

Construction: C-frame
Molding process: Compression
Capacity: 550 Ton
Pressing surface size: 154 x 16 inches
Number of openings: 2
Open daylight: 10 inches
Platen heating: Hot oil Isoplatens®
Operating temperature: 425 °F
Controls: NEMA 12 enclosure with motor starter for hydraulic power unit, push buttons and switches

Related Articles

Quote Your 500 Ton Press

French Service and support for custom hydraulic presses and machinery

Service & Support

Hydraulic Press Support Since 1900 | OEM Parts, Repairs, Rebuilds, Retrofits, and Field Service

Request a Quote

Tailored Solutions for Your Manufacturing Needs: Achieve Optimal Process Results with Our Customized Equipment and Specialized Solutions.

Scroll To Top